cleaning & maintaining

cleaning
cleaning using correct procedures with compatible household cleaners is recommended to prolong service life
1. rinse sheet with lukewarm water( under 60℃)
2. wash sheet with a solution of mild soap or household detergent and lukewarm water,using a soft cloth or sponge to loosen any dirt and grime. Nerver scrub with brushes,steel wool or other abrasive materials.
3. rinse sheet once again
4. wipe oil, wet paint, glue spotting etc. with soft cloth which absorbed anhydrous alcohols, coal oil or gasoline.
5. rinse with cold water and dry with a soft cloth to prevent water spotting.

Maintaining
1．The following are the incompatible chemicals which can cause cracks to sheets, please be careful:

incompatible chemicals to PC sheet

Half incompatible chemicals

incompatible chemicals
1. Acetone
2. Ammonia water
3. Saturation Fluorine ammonium
4. The saturation sulphurates the ammonium
5. benzene
6. Benzoic acid
7. Benzene methyl alcohol
8. Styrene
9. Stone carbonic acid
10.Sulphurate carbons two times
11.Carbon tetrachlorid
12.Chlorine benzene
13.Chloroform
14.Cloves
15.Sulphuric acid
16.Ether
17.Petrol
18.Petroleum
19.Benzene ethanol
20.Phenol
21.Prionic Acid
22.Four chlorine enduring
23.Ketone

2．sheet should be stored and protected against atmospheric influences like sun,rina ,etc.
3．periodic cleaning using correct procedures with compatible household cleaners is recommended to prolong service life. wash sheet with a solution of mild soap or household detergent and lukewarm water,using a soft cloth or sponge to loosen any dirt and grime.
4．sheet shouldn’t be placed directly on the cement floor.
5．To avoid the problem which caused by moisture build-up and dust/insect contamination inside the channels,ensure that all sheet edges are coverd before storage